0
0
0

   South Central MFA                     CLICK - MFA CONNECT
     Darren Scheets-South Central Manager
       

 
- DTN Headline News
10 Grain Storage and Safety Tips
By Matthew Wilde
Tuesday, November 17, 2026 10:21AM CST

ANKENY, Iowa (DTN) -- Keeping this year's grain in condition could be as challenging as getting it into the bin.

An unusually warm, wet fall across much of the Corn Belt not only delayed harvest but it's also making it more difficult to cool grain in bins. Grain cooled to below 40 degrees Fahrenheit slows fungal growth and spoilage.

Excessive rainfall toward the end of the growing season across much of the central Corn Belt, particularly Iowa, contributed to mold, fungal growth and seed diseases for both corn and soybeans. Corn ear rot and kernel and seed sprouting were also found. Damaged or lower-quality grain generally has a shorter storage life and can deteriorate more quickly in the bin, increasing the risk of spoilage. Mycotoxin development is another concern with damaged corn.

Grain storage experts urge farmers to keep a close eye on grain once bin doors close to keep it in good condition.

"Post-harvest grain management is going to be more challenging this year," said Gretchen Mosher, an Iowa State University (ISU) professor specializing in feed and grain systems and quality. She also manages ISU's Grain Quality Testing Laboratory. "This isn't a situation where stored grain can't be handled successfully, but it will take more attention and active monitoring to get through the season."

Alan Lockwood, director of product management for GSI based in Assumption, Illinois, said grain bin management systems are worth their weight in gold during challenging weather and grain-quality years.

GSI's Grainvue, for example, monitors grain temperature and moisture in bins and can detect elevated carbon dioxide (CO2) levels that may signal spoilage. Farmers can use that information to take corrective action. Automated systems can cool, dry or rehydrate grain based on preset parameters.

"The current weather patterns can be challenging, particularly if you're trying to get grain cooled down after coming out of the dryer," Lockwood said. "Blowing warm air across it won't do anything except waste dollars on electricity. A system that can automatically manage some of those pieces is certainly a big benefit from my perspective."

Farmers are harvesting corn and soybeans at a variety of moisture and quality levels, Mosher said. Corn samples recently sent to the ISU Grain Quality Testing Lab ranged from 23% moisture to less than 15% moisture. Mosher also noticed more foreign material (FM) in corn and soybean samples than usual, which can cause storage issues.

"Corn and soybeans came out of the fields wetter than they have the last several years, so farmers need to get it dried down quickly with care," she said. "You want to get the moisture content at 15% or lower and the grain temperature inside the bin to be about the same temperature as outside to avoid quality challenges through the winter, but we haven't seen consistent temperatures below 40 F to do that."

Mosher noted that farmers harvested a larger--than--average number of purple-stained and discolored soybeans this year, indicating a crop under duress due to the presence of mold.

"You can't get rid of it (the mold)," she added. "You can only manage it."

Here are 10 grain storage tips from Mosher and ISU resources:

1. Dry corn to 15% or less but avoid drying too far below 15% as this may increase broken corn kernels and FM content and reduce the pounds of salable material.

2. Dry soybeans to 13% moisture content to mitigate fungal metabolic activity. For long-term storage, target 11% to 12% moisture.

3. Cool stored grain to 35 F to 40 F as soon as outdoor temperatures allow to slow fungal growth and deter spoilage. "Use aeration fans when appropriate to drive down and moderate inside temperatures," Mosher said.

4. If daytime temperatures are high in the fall, cool grain at night.

Brian Kemp, who farms near Sibley, Iowa, recently finished harvest. "I shut fans off when it gets warm during the day and turn them on at night, so I didn't blow 60 F, humid air through dry corn."

5. Cover fan openings. When not in use, cover fans to prevent warm, moist air from getting into bins, along with pests.

6. Keep an eye on humidity. For soybeans, to minimize damage to the seed coat and to prevent splits, maintain a relative humidity of 40% or above.

7. Check stored grain frequently. Mosher recommended once or twice a week. Moldy grain has a shorter storage life than clean and dry grain held at the same temperature and moisture, generally between 60% and 70% of its normal storage life, according to ISU data. "It could take two people to check grain, one to turn on the aeration fan and the other to check for a musty or moldy smells," Mosher said.

8. Core bins. Remove light grain, fines and damaged grain particles that accumulate in the center of bins. This material tends to be moldier, produce toxins and hamper cooling and drying. Kemp said coring bins with corn is his top priority this fall.

"I plan to take at least a couple of loads out of every bin soon to keep corn in condition. As harvest progressed, I noticed more broken kernels and fines," he said.

9. Utilize monitoring tools. Once grain is in storage, ongoing temperature and CO2 monitoring are critical to identify mold, hot spots and spoilage. Deteriorating organic matter produces CO2.

10. Prioritize safety.

"I just completed a USDA-funded project studying grain bin engulfment and entrapments, and grain condition was the major causal factor of why people go into bins. Crusted or bridged grain doesn't support their weight," she said. "Be cautious and follow lockout-tagout procedures."

When grain bin entry is unavoidable, University of Minnesota Extension recommends taking several precautions, including never working alone, breaking up crusted or bridged grain with tools from outside the bin, and shutting down and locking out all grain-handling equipment before entry. Learn more at https://extension.umn.edu/…

Read more about grain bin safety at https://www.dtnpf.com/…

Learn more about grain storage at https://crops.extension.iastate.edu/…

Matthew Wilde can be reached at matt.wilde@dtn.com

Follow him on social media platform X @wildeagwriter


blog iconDTN Blogs & Forums
DTN Market Matters Blog
Editorial Staff
Friday, October 9, 2026 12:28PM CST
Friday, October 2, 2026 12:08PM CST
Monday, September 28, 2026 9:32AM CST
Fundamentally Speaking
Joel Karlin
DTN Contributing Analyst
Wednesday, September 30, 2026 10:45AM CST
Thursday, September 24, 2026 9:45AM CST
Thursday, September 24, 2026 9:45AM CST
DTN Ag Policy Blog
Chris Clayton
DTN Ag Policy Editor
Monday, October 5, 2026 12:34PM CST
Thursday, October 1, 2026 8:46AM CST
Wednesday, September 30, 2026 3:17PM CST
Minding Ag's Business
Katie Behlinger
Farm Business Editor
Monday, October 12, 2026 12:58PM CST
Tuesday, October 6, 2026 4:17PM CST
Thursday, August 27, 2026 8:41AM CST
DTN Ag Weather Forum
Bryce Anderson
DTN Ag Meteorologist and DTN Analyst
Tuesday, October 13, 2026 10:02AM CST
Thursday, October 8, 2026 7:51AM CST
Thursday, October 8, 2026 7:49AM CST
DTN Production Blog
Pam Smith
Crops Technology Editor
Thursday, October 8, 2026 12:25PM CST
Monday, September 28, 2026 10:06AM CST
Monday, September 14, 2026 4:30PM CST
Harrington's Sort & Cull
John Harrington
DTN Livestock Analyst
Monday, October 12, 2026 2:05PM CST
Monday, October 5, 2026 2:04PM CST
Monday, September 28, 2026 3:42PM CST
An Urban’s Rural View
Urban Lehner
Editor Emeritus
Thursday, October 8, 2026 8:17AM CST
Thursday, October 1, 2026 10:25AM CST
Thursday, September 17, 2026 6:37AM CST
Machinery Chatter
Dan Miller
Progressive Farmer Senior Editor
Monday, April 20, 2026 11:09AM CST
Monday, January 19, 2026 1:10PM CST
Friday, November 14, 2025 8:44AM CST
Canadian Markets
Cliff Jamieson
Canadian Grains Analyst
Wednesday, September 9, 2026 10:24AM CST
Thursday, August 27, 2026 11:54AM CST
Thursday, August 27, 2026 11:54AM CST
Editor’s Notebook
Greg D. Horstmeier
DTN Editor-in-Chief
Friday, July 3, 2026 5:23AM CST
Monday, June 29, 2026 8:06AM CST
Thursday, June 18, 2026 8:59AM CST
Copyright DTN. All rights reserved. Disclaimer.
Powered By DTN